ACUSON Freestyle User Manual 4-11
Patient Studies
Managing Patient Studies
Exporting Patient Studies
The Export function sends selected studies to a storage medium (on a network or a compatible
USB drive).
How to Export Studies
To export patient studies, follow these steps:
1. Be sure you have the desired type of export hardware connected, e.g., a USB drive or a
congured DICOM network.
2. Open the study list by selecting STUDY LIST from the SETUP menu.
3. Select a study by placing the cursor over the checkbox to the left of the study and
pressing the left Trackball key to check or uncheck the box. To export multiple studies at
one time, check multiple boxes.
4. Press the EXPORT Soft Key.
5. Specify the Congure Export choices (see “Export Parameters” on page 4-12).
6. Click [OK] to begin the export. While the export is taking place, the Export List shows
details about the study being exported and the status of the export, indicating how many
clips have been stored out of the total. To terminate the export, click [CANCEL].
NOTE: Allow the status indication to complete and show no additional clips to store
before removing the USB drive, otherwise the export may not be successful.
When a study has been successfully exported, a curved arrow symbol is displayed to the right
of the study.
To Next Page
Loading...
Need help?
General
