Siemens AG SPR2-330.815.01.03.02 ARCADIS Avantic
12.06 CS PS SP
Specific System Settings 41
Page 41 of 66
Medical Solutions
Backup 3.1
NOTE
A backup must be created following software installation, every
software update, and every system adjustment.
NOTE
After a backup group has been successfully burned to CD, the fol-
lowing message is displayed: "Please insert medium in CD-RW in
order to continue."
Confirm this message with "OK".
This does not require a new CD.
• Select "Backup & Restore" in the Service Software Home Menu.
• Place the backup CD (located in the monitor cart service compartment) in the CD-ROM
drive.
Fig. 18: Backup & Restore_Command
To Next Page
Loading...
