Siemens AG SPR2-330.815.01.03.02 ARCADIS Avantic
12.06 CS PS SP
Final Work Steps 51
Page 51 of 66
Medical Solutions
Completing the "ARCADIS Avantic Installation" protocol. 0
The manufacturer of this product requires information and the legislator demands proofs
that a product delivered free of defects from the factory continues to possess the required
and certified quality properties on installation and start-up.
It is therefore absolutely necessary that the installation report with the installation and
start-up data is sent without delay after completion of the work to the address stated on
the installation report.
You will find the report in the system folder.
To Next Page
Loading...
