Notes A-Z
77
C62 en, A31008-H6880-A1-1-7619 (13. February 2004, 15:46)
© Siemens AG 2003, I:\Mobil\L55\C62_Squirrel_(mc)\en\fug\_von_itl\C62long_A-Z.fm
Dial-up access CSD
(Circuit Switched Data)
Data transfer is made via a data
connection to a default IP address
of your network provider or service
provider. This connection can be
used for the exchange of data (e.g.
for access to the Internet or for using
WAP services).
As long as this connection is estab-
lished to use services, charges for
the connection accrue according to
the price list of your network provid-
er or service provider.
Dial-up access GPRS
(General Packet Radio Service)
GPRS is a new method for transmit-
ting data faster in the mobile net-
work. If you use GPRS and if the net-
work has sufficient capacity, you can
be connected to the Internet perma-
nently.
EMS
(Enhanced Messaging Service)
Besides (formatted) texts, you can
also send
• pictures (bitmaps) up to max.
32 x 32 pixels (black and white),
•sounds,
• animations (sequence of 4 pic-
tures) 8 x 8 and 16 x 16 pixels
(black and white),
using the EMS.
The elements listed above can be
transmitted individually or together
in an SMS.
With EMS, pictures and sounds can
also be sent (e.g. as screensavers
and ringtones).
This can result in messages exceed-
ing the length of a single SMS. In this
case individual text messages are
concatenated to form a single mes-
sage.
International dialling codes
Many international dialling codes
are stored in your phone. In standby
mode:
0
Hold down until a "+" is
displayed. This replaces
the first two digits of the
international dialling
code.
§+List§ Press.
Select the required country. The in-
ternational dialling code is dis-
played. Now add the national
number (in many countries without
the first digit) and press the Call key.
Message memory full
The SIM memory is full when the
message icon flashes. No more SMS
messages can be received. Delete or
save messages (page 45).
L
To Next Page
Loading...
Need help?
General
