CMR Installation and Operation Manual | Issue: July 2021, Revision 01.0
2
1 Safety Information
1.1 Qualified person
For the purpose of this instruction
manual a qualified person is one
who is familiar with the installation,
construction or operation of the
equipment and the hazards involved.
In addition, this person has the
following qualifications:
• Is thoroughly familiar with this
manual.
• Is trained and authorized to switch,
de-energize, clear, ground/earth,
and tag circuits and equipment in
accordance with established safety
procedures.
• Is trained in techniques to distinguish
exposed energized parts from other
parts of electric equipment and to
determine the nominal voltage of
exposed live parts.
• Is trained in the proper techniques
to determine approach distances
specified in the applicable local
standards.
• Is trained in the decision-making
process necessary to determine the
degree and extent of the hazard and
the personal protective equipment
and job planning necessary to
perform the task safely.
• Is trained in the proper care and
use of personal protective equipment,
such as: rubber gloves, hard hat,
safety glasses or face shields, flash
clothing, etc., in accordance with
established safety practices.
• Is trained in rendering first aid.
This manual provides installation, operation,
and testing procedures for the Siemens
Compact Modular Recloser. Thoroughly read
this manual before installing and operating
your Siemens Compact Recloser.
The information contained herein is
general in nature and not intended for
specific application purposes. It does not
relieve the user of responsibility to use
sound practices in application, installation,
operation and maintenance of the
equipment purchased.
Only Qualified Personnel who are familiar with
this equipment should install or operate it.
To Next Page
Loading...
