CMR Installation and Operation Manual | Issue: July 2021, Revision 01.0
4
1 Safety Information (continued)
NOTICE
Excessive current
The user must assess the potential load and fault current levels and assure these
are within the capability of the Compact Recloser model selected for the site.
A sustained excessive load or fault current can result in damage to the recloser.
These instructions cover most generic installation types. Not all possible variations
in equipment options, site specific restrictions, local procedures and every
contingency that may emerge during installation, operation or maintenance are
covered. They are designed to be used as a minimum standard and can be adapted
to suit additional local requirements. Should additional information be required
to address issues not explained in this manual please contact your local Siemens
Customer Service for further advice.
To Next Page
Loading...
