Siemens CP 243-1 - Page 112

Diagnostics
5.2 Error messages of the CP 243-1
CP 243-1
112 Operating Instructions, 03/2012, C79000-G8976-C244-02
Error byte Description Reaction/remedy Transfer mechanism
hex dec Byte offset in the
SM area
Return value
(ETHx_)
16#0E 14 The data to be transferred
could not be read from the
CPU
Check configuration,
particularly the .fdb file
35 _FTPC
_EMAIL
16#0F 15 The data to be transferred
could not be written to the
CPU
Check configuration,
particularly the .fdb file
35 _FTPC
16#10 16 Connection to one of the
configured e-mail servers
not possible
Check connection path
to the configured e-mail
servers
Check configuration,
particularly the .edb file
34 _EMAIL
16#11 17 The login was rejected by
the e-mail server
Check whether the e-
mail server is
configured correctly
Check configuration,
particularly the .edb file
34 _EMAIL
16#12 18 An error occurred while
generating the e-mail to be
sent
Check configuration,
particularly the .edb file
and the placeholders
used in the e-mail
34 _EMAIL
16#13 19 The e-mail configuration
was detected as incorrect
Check configuration,
particularly the .edb file
and the placeholders
used in the e-mail
34 _EMAIL
16#14 20 The generated e-mail text is
too long
Check configuration,
particularly the .edb file
and the placeholders
used in the e-mail
34 _EMAIL
16#17 23 No connection to the
configured FTP server
possible
Check communication
path to the FTP server
Check configuration,
particularly the .fdb file
35 _FTPC
16#18 24 Login with FTP server failed Check whether the FTP
server is configured
correctly
Check configuration,
particularly the .fdb file
35 _FTPC
16#19 25 Error in the FTP transfer
protocol
Check whether the FTP
server is configured
correctly
Check whether this file
can be accessed at all
Check configuration,
particularly the .fdb file
35 _FTPC