Siemens Desigo PXC4.M16 Installation Manual

Desigo™
Automation stations
PXC4.M16
For the control of primary plants
● Compact automation station for HVAC and building control systems,
freely programmable using graphical programming interface
● Communication BACnet MS/TP (BTL certified)
● Integration of Modbus data points via RTU
● 16 inputs/outputs: 12 universal inputs/outputs, 4 relay outputs
Extendable via I/O modules TXM…
● KNX PL-Link bus to connect RDG2..KN room thermostats, sensors, and operator
units (including bus power)
● Integration of M-bus energy meters via RS485 level-converter
● WLAN interface for engineering and commissioning
● Operating voltage AC or DC24V
● Mounted on standard rails or on the wall
● Plug-in screw terminal blocks
A6V11937668_en--_l Smart Infrastructure
2023-12-22

Siemens Desigo PXC4.M16 Specifications

General

Product Type	Controller
Product Type Designation	PXC4.M16
Power Supply	24 V AC/DC
Mounting Type	DIN rail mounting
Protection Class	IP20
Inputs	16
Communication Protocol	BACnet
Relative Humidity	5 to 95 %
Dimensions (W x H x D)	60 mm