13
Remote control functions
easyTek is a remote control for your hearing instruments.
The following functions are available:
Function Description
Volume
or
Press shortly to adjust step by step.
Press and hold until desired volume is
reached.
Hearing program
short press
➧
Switches to the next hearing
program.
This function is not available during
audio streaming.
Turn on/off
(standby)
and long press (2 seconds)
➧
Turns your hearing instruments
on or off.
Further information:
■ If you are wearing two hearing instruments, both
instruments are adjusted at the same time.
■ After turning the hearing instruments on with easyTek,
the previously used volume and hearing program are
set.
You can quickly turn the hearing instruments back
on by pressing the multi-function button shortly.
To Next Page
Loading...
Need help?
General
