22
Pairing our transmitters
Each transmitter has to be paired once with easyTek.
You can use up to two of our transmitters.
Preconditions:
■ easyTek is turned on.
■ Neckloop is plugged into both sides, and easyTek is
worn around the neck.
■ Transmitter is within operating distance.
Pairing our transmitters:
X Turn on the transmitter.
X Press , and simultaneously until the blue
and green LEDs flash
. This takes approximately
5 seconds.
easyTek searches for transmitters nearby.
To Next Page
Loading...
