Siemens easyTek

23
Pairing may take several seconds.
The blue LED indicates the pairing status:
Pairing status for our transmitters
flashing, then on
➧
Pairing has been completed successfully. Streaming
starts automatically. You can now use the transmitter.
flashing, then off
➧
Pairing was not successful. In this case, ensure that the
transmitter is within operating distance and try again.
You can also use the easyTek App for pairing.
Further information:
■ If the transmitter is only temporarily (< 5 min) out
of operating distance, the transmission of the audio
signal is interrupted but automatically picked up again
when the transmitter is back within operating distance.
■ If a transmitter is already paired, you cannot pair it
again.
■ If you pair a third transmitter, the first paired
transmitter is automatically unpaired.