Structure and function
15
Siemens Building Technologies 007995_a_en_--.doc
Fire & Security Products 04.2004
4.2.6 Indicator module (on option)
The indicator module is optional and possibly not equipped in your system.
The indicator module can display the following information:
Number of registered alarms (alarm counter)
Expiry of the delay periods V1 and V2 in case of alarm
Time
Events with date and time, e.g. fault (recallable event memory)
4.2.7 Maintenance possibilities
Fire detection systems must be serviced regularly. Only this way can it be ensured
that the system works properly in case of emergency. For this reason, regularly
perform the following maintenance work:
Test LED on the control unit
Test detectors
Test fire alarm devices such as horns or flash-lights
Test remote transmission
Check alarm organization
To Next Page
Loading...
