Safety regulations
7
Siemens Building Technologies 007995_a_en_--.doc
Fire & Security Products 04.2004
2.2 Safety-relevant working instructions
Country-specific standards
The products are developed and produced in compliance with the relevant interna-
tional and European safety standards. Should additional country-specific, local
safety standards or regulations concerning project planning, installation, operation
and disposal of the product apply in the place of operation, then these standards or
regulations must also be taken into account in addition to the safety regulations
mentioned in the product documentation.
Please especially consider the following instructions:
Do not open the device!.
If any tools or accessories such as ladders are required, safe and suitable de-
vices must be used.
Prevention of spurious tripping of the remote transmission must be assured.
Inform the alarm and fault receiving stations connected to the system (e.g. fire
brigade) before carrying out the tests.
Activate fire control installations for test purposes only when you are sure that no
damage will be caused.
To Next Page
Loading...
Need help?
General
