FS-250 PROGRAMMING MANUAL
2
Maintenance Level
The Maintenance level is accessed via the User Menu and the correct password.
The functions accessible in the maintenance level are:
• Enabling or disabling devices, outputs, groups, zones and option modules
• Configuring and running a Quick Test.
• Printing History
• Printing Detector Levels
• Editing Device and the system label
• Setting the system time and date
• Changing the Maintenance Level access password
• Program a Device
• Clear History
Technician Level
The Technician level is accessed via the User Menu and entering the correct
password. The functions accessible in the maintenance level are:
• Configure devices, outputs, groups, zones and option modules.
• Setting System parameters (i.e. automatic silence, alarm silence inhibit, reset
inhibit, etc)
• Configure bell codes
• Validate the backup configuration
• Swapping the primary and backup configuration
• Copying the primary to the backup configuration
• Printing the primary and backup configuration
• Changing the Technician Level access password.
To Next Page
Loading...
Need help?
General
