Siemens FT724

Other manuals for Siemens FT724

Quick Reference Guide62 pages

Installation10 pages

Questions and Answers:

M
Michelle BlackburnAug 9, 2025
What to do if Siemens Control Panel indicates mains failure?
- K
  Kristen HayesAug 9, 2025
  If your Siemens Control Panel indicates a mains failure, it could be due to a mains failure in the public network, in which case no action is required as the emergency power supply is ensured by batteries for at least 12 hours, or up to 72 hours depending on customer specifications. Alternatively, check the fuses in the building's current distributor and replace them if necessary.
D
Denise MeadowsAug 17, 2025
What to do if the automatic detector is missing in Siemens Control Panel?
- K
  Kevin BlackAug 17, 2025
  If the automatic detector is missing from your Siemens Control Panel, re-insert the detector. If the detector is out of order, replace it with another detector of the same type.
G
grant22Aug 23, 2025
What to do if Siemens FT724 manual call point is damaged?
- D
  Dr. Frances Stewart MDAug 23, 2025
  If the glass pane of the manual call point in your Siemens Control Panel is broken, replace the glass pane. If there are other damages, contact service provider.
A
Anthony MaynardAug 31, 2025
How to fix 'paper out' error on Siemens FT724?
- J
  Joseph MaxwellAug 31, 2025
  If your Siemens Control Panel displays a 'paper out' error, it means the paper roll in the printer has been used up. Insert printing paper to resolve this issue.

Siemens FT724 Specifications

General

Type	Fire Alarm Control Panel
Manufacturer	Siemens
Model	FT724
Display	LCD
Input Voltage	230V AC
Protection Class	IP30
Loop Length	Up to 3000 m
Battery Backup	Yes
Networking	Ethernet, RS485
Operating Temperature	0°C to 40°C
Weight	4.5 kg

Summary

Safety

Safety Instructions

Explains safety notices, symbols, and signal words used in the document.

Safety Regulations for Method of Operation

Covers national standards, electrical installations, mounting, and maintenance safety.

Setup of the Person Machine Interface

PMI

Describes the Person Machine Interface (PMI), its components, and their functions.

Person Machine Interface with FBP [AU]

Details the PMI with Fire Brigade Panel (FBP) for operation.

Cerberus Remote

Introduces Cerberus-Remote software for PC display of PMI.

Cerberus Mobile

Describes 'Cerberus Mobile' app for smartphones for display and operation.

Operation Functions

Selection and Opening Execution

Explains how to select and open list items or execute commands.

Cerberus Remote Operation Modes

Details 'Limited access (view only)' and 'Full access (view/operation)' modes.

Cerberus Mobile Operation Modes

Describes 'Limited access' and 'Full access' modes for Cerberus Mobile.

Operation

ALARM Procedure

Procedure for alarms without delayed transmission.

ALARM Procedure PMI with FBP [AU]

ALARM procedure using PMI with Fire Brigade Panel.

Procedure in Case of Fault

Steps to follow when a fault occurs.

Switching Off Switching On

Explains how to switch system parts off and on, including detectors and remote transmission.

Log In Change Access Level

Enables access levels via PIN or key switch.

Switching Between Manned Unmanned Operation Modes

Explains switching between Manned and Unmanned modes and their impact.

Execute Commands - Basics

Introduces different methods for entering commands.

Testing

Covers various testing procedures for the system, including detectors and controls.

Testing Detectors

Explains the detector test as a hardware function test for devices.

Carrying Out an Installation Test

Details the installation test for the complete fire detection system.

Control Test

Describes testing configured controls without activating outputs.

Activation Deactivation Reset

Covers activating, deactivating, and resetting system outputs and components.

Deactivating Activating Alarm Devices

Details how to deactivate and activate alarm devices from the PMI.

Activating Resetting Zone

Explains how to activate and reset a zone.

Activating Deactivating Fire Control

Details how to activate or deactivate fire control functions.

Activating Evac Controls

Explains how to activate evacuation controls for alarm device zones.

Entering the Configuration

How to configure settings like operation modes and customer text.

Auto-configure Station

How to commission a station automatically without additional settings.

Auto-configure Line

Explains how to read in topology and auto-configure a line.

Enabling Disabling Cerberus Remote

How to enable or disable Cerberus Remote access.

Connecting Cerberus Remote

Specifying Operation Mode for Cerberus Mobile

Polling Deleting the Event Memory

Settings Administration

System Functions

Operation Modes

Access Level and Access Rights

Explains how the station is protected by access levels and rights.

Commands with Required Access Levels

Switching OnOff Command Group

Lists commands for switching elements on/off and their required access levels.

Command Zone Test

Lists commands related to testing and their required access levels.

ActivatingDeactivating Command Group

Lists commands for activating/deactivating elements and their access levels.

Configuration Command Group

Maintenance Command Group

System Description

Overview

Gives an overview of the setup and functions of the fire detection installation.

Topology

Explains the structure trees: Hardware, Detection, Control, Operation, Network.

Detection Tree

Operation Modes of Detection Tree Elements

Control Tree

Operating Tree

Network Tree

Represents the networking of the FS720 system, including types and connections.

Functional Allocation

Acquisition

Explains how detectors acquire fire phenomena and transmit danger levels to zones.

Evaluation

Explains how danger levels are evaluated to trigger alarms or not.

Control

Explains how the system alerts people and initiates actions based on event categories.

Fire Control

Details automatic measures initiated during a fire, like closing dampers.

Evacuation Control

Describes configuring evacuation functions for alarm device zones.

Damper Control

Alarm Verification Concept (AVC)

Explains the concept for delayed alarm transmission and personnel interaction.

Intervention Concept (IC)

Explains how events are acquired, classified, and evaluated for alarming.

Events

Faults Troubleshooting

Faults, Causes, and Remedies

Lists common faults, their causes, and remedies for detectors, call points, etc.

System Maintenance

Maintenance Recommendation

Provides recommendations for regular maintenance work and intervals.

Related product manuals