Siemens FT724 - PIN Administration

Operation
Settings / Administration
5
104 | 184
Building Technologies
A6V10211076_i_en_
--
Fire Safety
2015
-
12
-
15
5.27.2 PIN administration
You can change an existing PIN and create a new PIN or delete a PIN with the
corresponding authorization.
PIN administration not available
If PIN administration is not available at the station, you must configure the PINs in
Engineering Tool. You will find more information in document A6V10210424.
'Change PIN'
1. Select 'Main menu' > 'Settings/administration' > 'Manage PINs'.
2. Select the 'Change PIN' menu item.
3. Enter the PINs in accordance with the input fields and confirm with <ok>.
 The PIN has been changed.
Change PIN
Old PIN: ****
New PIN: ****
Verify new PIN: ****
Confirm with <ok>/Exit with <C>
Delete with <Cursor up>
'Create PIN'
ϖ You have the required authorization level.
1. Select 'Main menu' > 'Settings/administration' > 'Manage PINs'.
2. Select the 'Create PIN' menu item.
3. Enter an admissible access level.
4. Enter the PIN in accordance with the input fields and confirm with <ok>.
 A new PIN has been created.
Create PIN
Access level: __
Enter PIN: ****
Verify PIN: ****
Confirm with <ok>/Exit with <C>
Delete with <Cursor up>