Siemens FT724 - 7 Commands with Required Access Levels; Switching On;Off Command Group

Commands with required access levels
'Switching on/off' command group
7
120 | 184
Building Technologies
A6V10211076_i_en_
--
Fire Safety
2015
-
12
-
15
7 Commands with required access levels
Certain commands that are listed in
this chapter can only be executed by the
service technician or someone with access level 3. You will find a description of
these specific commands in document A6V10210416. See chapter 'Applicable
documents'.
See also
1 Access level and access rights [➙ 116]
7.1 'Switching on/off' command group
Command Element category (short) Element category (long) Access level
OFF Zone
Detect.
RT fire
Alarmg.
Evac gr
UniEvac
Ph.Evac
Alert
Fire ct
OUTFire
Sounder
Printer
Zone
Detector
RT fire control
Alarming control group
Evac control group
Universal evac control
Phased evac control
Alert sounder
Fire control
Output Fire control
Sounder control
Printer
2,1
OFF/timer Zone Zone 2,1
Renovation mode Zone Zone 2,2
ON Zone
Detect.
RT fire
Alarmg.
Evac gr
UniEvac
Ph.Evac
Alert
Fire ct
OUTFire
Sounder
Printer
Zone
Detector
RT fire control
Alarming control group
Evac control group
Universal evac control
Phased evac control
Alert sounder
Fire control
Output Fire control
Sounder control
Printer
2,1
Non-MCP zones OFF Area, ↑ Section Area, Section 2,1
Non-MCP zones OFF/timer Area, Section Area, Section 2,1
Non-MCP zones ON Area, Section Area, Section 2,1
MCP zones OFF Area, Section Area, Section 2,1
MCP zones OFF/timer Area, Section Area, Section 2,1
MCP zones ON Area, Section Area, Section 2,1