Settings / Administration
5
106 | 184
5.27.4 Adjusting the display brightness
You can set the display brightness on five levels between 'Off', 25 %, and 100 %.
'Change display brightness'
1. Select 'Main menu' > 'Settings/administration' > 'Display settings'.
The 'Display settings' window is open.
2. Select 'Change display brightness'.
The window for the adjustment is open.
3. Select the desired settings in the list.
The display brightness has been adjusted.
5.27.5 Setting time and date
You will have to reset the clock if the fire control panel has been de-energized. In
countries with central European summer time (CEST), the system clock
automatically switches between daylight savings time and regular time.
'Enter date / time'
1. Select 'Main menu' > 'Settings/administration' > 'System commands'.
The 'System commands' window is open.
2. Select 'Set system time'.
The 'Enter date / time' window is open.
3. Enter the date and time and/or confirm with <ok>.
The cursor jumps to the next field and terminates the input after the last
field.
Adjusted or confirmed date and time are set.
Enter date / time
25-04-09 12:42:58
(dd-mm-yy) (hh:mm:ss)
Confirm with <ok>/Exit with <C>
Delete with <Cursor up>
Table 5: Input window for time and date
To Next Page
Loading...
Need help?
General
