Setting up Cerberus Remote link with integrated IP
5
99 |
Building Technologies
5.21 Setting up Cerberus Remote link with integrated IP
Situation and motivation
● In addition to local connection, 'Cerberus-Remote' can be used to establish a
connection to a ↑ 'Station' using a network and IP address.
● You might want to view various 'Stations' with 'Cerberus-Remote'.
● We would recommend avoiding the repeated entering of IP addresses when
repeatedly establishing connections to 'Stations'.
Option
● Execution of 'Cerberus-Remote' with additional parameters (IP address and
PIN).
● Save modified program execution as link.
Procedure
ϖ Start Cerberus-Remote as its own application (FX2020) and not from the
corresponding task card in Cerberus-Engineering-Tool (FX2030).
1. Right-click the link in 'Start' > 'Siemens' > 'FX2020' > … to go to the executable
'Cerberus-Remote' file and copy the link to the clipboard or an editor.
2. Add following parameters to program execution:
– IP address for ↑ GAP.
– Host ID for 'C-WEB'-'Station' to be viewed with 'Cerberus-Remote'.
– PIN for 'Access level' 3.
Modified program execution with integrated IP is created.
Example:
C:\Program Files\Siemens\F-FX2020\XL_en_1-V2.1>F-FXS2009.exe"
-visualizer ip=192.168.200.1 host=1 pin=0000
κ Test program execution command using 'Start' > 'Execute'
Creating link on desktop
1. Right-click on desktop and select 'New' > 'Link'.
2. Copy tested, modified program execution command to input field.
3. Confirm with 'Continue' and give link a name.
4. Click on 'Finish'
Link with modified program execution and integrated IP is set up.
5.22 Operating Cerberus Remote
You can operate Cerberus-Remote with the mouse or with the PC keyboard.
The operating functions of the keys shown are identical with those on the Station'.
To Next Page
Loading...
Need help?
General
