Siemens FT724 - Switching off the Printer; Show Version

Operation
Switching off the printer
5
110 | 184
Building Technologies
A6V10211076_i_en_
--
Fire Safety
2015
-
12
-
15
5.30 Switching off the printer
You can ↑ switch off the printer with a command.
↑ Switching off the printer
1. Press <Menu>.
 The main menu is open.
2. Press 'Function On/Off' <softkey 1>.
 The window with element categories and elements is indicated.
3. Select the 'Printer' element and press <softkey 1>.
 The window with the command selection is open.
4. Select the 'OFF' command and confirm with 'ok'.
 The printer is switched off.
To switch on a printer that has been switched off, proceed as when switching the
printer off but select the 'ON' command.
5.31 Show version
The version of the ↑ 'Station' and the configuration data are available in 'Hardware
tree'.
Version indication
1. Select 'Main menu' > 'Topology'.
 The three partial trees of the topology tree are indicated.
2. Select 'Hardware tree'.
3. Select the 'Station'.
4. Press the 'More Options' softkey.
 The 'Select option' window is open.
5. Select 'Show details'.
 The version of the 'Station' and configuration data are indicated.