Siemens FT724 - Changing Visibility; Deactivating Standby

Operation
Changin
g visibility
5
60 | 184
Building Technologies
A6V10211076_i_en_
--
Fire Safety
2015
-
12
-
15
5.8 Changing visibility
See also
1 Visibility [➙ 118]
5.8.1 Deactivating standby
'
PMI standby visibility
' cannot be activated manually.
The 'Deactivate standby visibility' command is only available once the monitored
'Station' or the ↑ management station is back in normal operation.
ϖ The 'PMI standby visibility' is active.
ϖ The monitored 'Station' or the ↑ management station is in ↑ normal operation.
1. Select 'Main menu' > 'Message summary'.
 The message categories containing messages are displayed.
2. Select 'Information'.
 'PMI standby visibility' is shown.
3. Select this element.
4. Press <Execute Commands>.
5. Select 'Deactivate standby visibility'
 'PMI standby visibility' is deactivated.
See also
1 Standby visibility [➙ 119]