Siemens FT724 - Cerberus Mobile Operation Modes

Operation functions
Cerberus Mobile operation modes
4
39 |
184
Building Technologies
A6V10211076_i_en_
-
-
Fire Safety
2015
-
12
-
15
4.8 Cerberus Mobile operation modes
Two operation modes can be specified for 'Cerberus Mobile' at the ↑ 'Station':
● 'Limited access (view only)'
● 'Full access (view/operation)'
The operation mode must be configured at the 'Station'.
'Limited access (view only)'
In this operation mode, 'Cerberus Mobile' displays ↑ 'Station' events. The events
displayed are determined by the configured 'Visibility' for 'Cerberus Mobile'. In this
operation mode, you cannot operate the 'Station' with 'Cerberus Mobile'.
'Full access (view/operation)'
In this operation mode, you can operate the ↑ 'Station' with the controls in
'Cerberus Mobile'. The events displayed are determined by the configured
'Visibility' for 'Cerberus Mobile'.