Installing parameter assignment screen forms
Call the SETUP.EXE program on the backup copy of your installation diskette. This installs both
the parameter assignment screen forms and the FC CNT_CTRL and the FC DIAG_INF on your
programming device. The FCs are added to the standard library in the "FM_CNT_L" catalog.
Follow the instructions displayed in the SETUP menu on the display.
Example Program
A comprehensive example program is inserted into the "Examples" sub catalog in the STEP 7
catalog in the FM_ZAEHL project during installation.
Reading the readme le
Important up-to-date information about the provided software can be found in a readme le.
You can read this le with the WORDPAD editor in Windows.
Calling parameter assignment screen forms
The parameter assignment screen forms are displayed automatically after successful
installation, if you assign the FM 450-1 parameters within the hardware conguration
Calling the integrated help
There is an integrated online help for the parameter assignment screen forms that you can call
in any phase of parameter assignment either with the F1 key or with the Help button.
Parameter assignment
5.2 Installing and calling parameter assignment screen forms
Counter module FM 450-1
38 Equipment Manual, 03/2022, A5E03648739-AC
To Next Page
Loading...
