Siemens FM 450-1 - Page 89

Address Variable Data type Initial value Comment
44.2 STS_STA
1
BOOL FALSE Status digital input START (read user)
44.3 STS_STP
1
BOOL FALSE Status digital input STOP(read user)
44.4 STS_CMP1
1
BOOL FALSE Status output comparison value 1 (read user)
44.5 STS_CMP2
1
BOOL FALSE Status output comparison value 2 (read user)
44.6 STS_COMP1
1
BOOL FALSE Reserved
44.7 STS_COMP2
1
BOOL FALSE Reserved
45.0 E_BIT3_0 BOOL FALSE Reserved
45.1 E_BIT3_1 BOOL FALSE Reserved
45.2 E_BIT3_2 BOOL FALSE Reserved
45.3 E_BIT3_3 BOOL FALSE Reserved
45.4 E_BIT3_4 BOOL FALSE Reserved
45.5 E_BIT3_5 BOOL FALSE Reserved
45.6 E_BIT3_6 BOOL FALSE Reserved
45.7 E_BIT3_7 BOOL FALSE Reserved
46.0 ACT_CMP1
1
DINT L#0 Current comparison value 1 (read user)
50.0 ACT_CMP2
1
DINT L#0 Current comparison value 2 (read user)
The following diagnostics data are entered by the FC_DIAG_INF
54.0 MDL_DEFECT BOOL FALSE Module faults
54.1 INT_FAULT BOOL FALSE Internal error
54.2 EXT_FAULT BOOL FALSE External error
54.3 PNT_INFO BOOL FALSE Channel error
54.4 EXT_VOLTAGE BOOL FALSE Auxiliary voltage fault
54.5 FLD_CNNCTR BOOL FALSE Front connectors
54.6 NO_CONFIG BOOL FALSE Missing parameters
54.7 CONFIG_ERR BOOL FALSE Faulty parameters
55.0 MDL_TYPE BYTE B#16#0 Module type
56.0 SUB_MDL_ERR BOOL FALSE Incorrect/missing interface module
56.1 COMM_FAULT BOOL FALSE Communication error
56.2 MDL_STOP BOOL FALSE RUN/STOP operating status indicator
56.3 WTCH_DOG_FAULT BOOL FALSE Watchdog (FM)
56.4 INT_PS_FLT BOOL FALSE Internal power supply fault
56.5 PRIM_BATT_FLT BOOL FALSE Battery monitoring
56.6 BCKUP_BATT_FLT BOOL FALSE Backup fault
56.7 RESERVED_2 BOOL FALSE Reserved
57.0 RACK_FLT BOOL FALSE Module rack fault
57.1 PROC_FLT BOOL FALSE CPU fault
57.2 EPROM_FLT BOOL FALSE EPROM fault
57.3 RAM_FLT BOOL FALSE RAM fault
57.4 ADU_FLT BOOL FALSE ADC/DAC fault
57.5 FUSE_FLT BOOL FALSE Fuse
57.6 HW_INTR_FLT BOOL FALSE Hardware interrupt lost
57.7 RESERVED_3 BOOL FALSE Reserved
58.0 CH_TYPE BYTE B#16#0 Channel type
Assignment of the DB
10.1 Assignment of the DB
Counter module FM 450-1
Equipment Manual, 03/2022, A5E03648739-AC 89