28
Like other Hicom telephones, the mobile unit allows you to
perform the following functions by entering codes. The codes
in your system may deviate from the standard codes speci-
fied here. Consult your system administrator if you have any
queries about the codes in your system.
The
confirmation tone
indicates a
successfully com-
pleted
function. The error tone is audible in the event of a
malfunction, see also page 62.
You can
store frequently used functions
as short cuts (see
page 42)
or
as Select Service functions (see page 53). This
depends on the status of the mobile unit when the function is
started.
The functions in this overview are, therefore, marked
with
(Short cut)
or to indicate how they are stored.
Overview - code functions
Functions
1
)
Standard
code
System-
specific
code
2
)
Accept call waiting (Short cut)
Answer call from a (second) waiting
party (second call).
✱
55
Do not disturb on
off
Prevent incoming calls.
✱
97
#
97
Call forwarding on
all calls
external calls only
internal calls only
Call forwarding off
Forward calls to an other telephone.
✱
11+ph. no.
✱
12+ph.no.
✱
13+ph.no.
#
1
Call distribution
(ACD)
Register
(beginning of work period)
De-register
(end of work period)
Temporary de-registration
Acknowledge after de-registration
Request wrap-up time
Acknowledge wrap-up time
ACD night service on
off
Distribute call in a team.
✱
401
#
401
✱
402
#
402
✱
403
#
403
✱
404
#
404
Associated service
Activate or deactivate functions for
other telephones.
✱
83+
partner+
services
procedure...
Switching functions
29
Switching functions
Associated dialling
Set up connections for other
telephones.
✱
67+
Partner+
ph. no.
Override (Short cut)
Override and speak in a busy
connection.
✱
62
Baby alarm,
Room monitoring
(system)
For the acoustic monitoring of a specific
room.
✱
88
Reset services for own
base
Reset activated functions.
#
0
Voice calling
Communication with telephone partner
via partner’s loudspeaker in the tele-
phone.
✱
80+ph.no.
Call trace
Identify an external caller via the net-
work provider. The feature must be
requested separately from Telecom.
✱
84
Message text
send
delete
(sent/received message texts)
de lete
(sent message texts)
de lete
(received message texts)
call sender
Send predefined texts (only to
optiset E with display).
✱
68+ph. no.
+text no.
#
680
#681
#682
#683
Conference
(up to 6 users)
(Short cut)
start
end
Add further telephone partner to
conversation.
✱
3
#
3
Speed dialling
Dial centrally stored speed dialling
destinations
✱
7+speed
dial. no.
Release line
Release busy external lines (active calls
on this line are disconnected).
✱
43
Shuttle (Short cut)
Switch between two connections.
✱
2
Functions
1
)
Standard
code
System-
specific
code
2
)
30
Switching functions
DTMF dialling
(tone dialling)
(Short cut)
Transmit DTMF signals.
✱
53
Night service on
off
Diversion of all calls to a fixed
destination.
✱
44+
✱
or ph. no.
#
44
Park (Short cut)
Unpark
Hold call and resume at different
telephones.
✱
56+park
pos.
#
56+park
pos.
Page
Answer
Locating person using assigned pocket
receivers.
✱
45+ph.no.
#
45+ph.no.
Project code
Assign toll connections to certain
projects.
✱
60+
PCODE[+
#
]
Callback store (Short cut)
delete
Storing an automatic callback request,
see also page 25.
✱
58
#
58
Suppress phone number on
off
Your number/name is not displayed on
called party’s phone.
✱
86
#
86
Assign phone number
Assign other numbers to your own
phone. These numbers then appear in
the display of the called party’s
telephone.
✱
41+
ph. no.
Answer group on
off
Signal calls from other telephones and
answer calls on these telephones.
✱
81+ph. no.
#
81
Hunt group/group call
activate
deactivate
Hunt group calls/group call are no
longer signalled to the user who has left
the hunt group.
Hunt group (the telephones ring in
succession).
Group call (the telephones ring
simultaneously).
✱
85
#
85
Functions
1
)
Standard
code
System-
specific
code
2
)
To Next Page
Loading...
