13
General
Display key
for cancelling functions/
returning to the next menu level up.
On-hook key
for ending calls or for cancelling
functions and
returning to the "on" status
immediately.
The
currently selected (highlighted)
function is displayed
on a
dark background
.
A
dotted line
indicates the
end of the menu.
If you scroll
further, the first function in the menu is selected again.
When the
"line "
is
selected,
press the display key
to jump back to the higher-level menu or to the "on" status
display.
Function selection via codes
(switching functions)
Most switching functions, for example, the callback or shut-
tle functions, can be executed using codes.
You will find an overview of all executable functions on page
28.
14
Putting the mobile unit into service
.
● Hold the mobile unit with the
dialling keypad facing
downwards
(see
Figure 2
).
A battery compartment for
2 batteries
is located in the lower part of the mobile unit.
● To open the battery compartment, slide the lid upwards in
the direction of the arrow (see
Figure 2
).
● Insert the two
batteries supplied
in the battery compart-
ment
as shown in Figure 2.
Ensure that the batteries are inserted correctly (polarity
illustrated on the
label in the battery compartment
).
The battery compartment cannot be closed if
batteries
are inserted incorrectly
!
● Slide the
lid
of the battery compartment
downwards into
the grooves
on the mobile unit (see
Figure 2
) until the lid
is secured in place.
Inserting batteries into the mobile unit
Note:
●
Read
the
safety instructions on page 2
first!
● Only use the
supplied or permitted batteries,
do not
use normal batteries (non-rechargeable) – see page
16.
Fig. 2: Rear of mobile unit, battery compart. open
15
Putting the mobile unit into service
The batteries supplied (NiCd) are
not charged.
To charge the batteries, insert the mobile unit in the Gigaset
2000L charging shell. The mobile unit can be inserted with
the display facing upwards or downwards.
The LED on the charging shell lights up while the bat-
teries are charging. In addition, the battery symbol in the
mobile unit display indicates the charging status:
Battery charging times:
Charging and using the batteries
Batteries empty.
Batteries charged 33%.
Batteries charged 66%.
Batteries charged 100%.
Note:
●
New
batteries should be initially
charged
for a
mini-
mum
period of
16 hours
without interruption
– irre-
spective of the battery symbol displayed!
● In order to maintain
max. battery storage capacity
for
as long as possible,
the mobile unit should only
ever be inserted in the charging shell when the
batter-
ies are almost empty
.
● The batteries warm up during charging.
● Old, defective batteries must be disposed of in accord-
ance with legal requirements, not in the normal waste
disposal system.
Type
Charging time in
mobile unit
(hours)
Loading time in
reserve battery
compar tment
(hours)
NiCd
4-5 24
NiMH, 1100 mAh
8-9 40
To Next Page
Loading...
