19
Putting the mobile unit into service
●
Off status:
display clear –
calls are not received!
●
On status:
e.g.
is displayed – prerequisite for
all telephone functions,
normal operating status!
Activating the mobile unit:
Press the On/Off key
– you hear the
confirmation beep.
Display when telephone is in the "on"
status, see page 10.
Deactivating the mobile unit:
Press the On/Off key until the display
is clear –
you hear the confirmation
beep
.
This allows you to protect your mobile unit
against inad-
vertent key activation,
e.g. when carrying it in your bag.
Calls are signalled
even if the keypad is locked and can be
answered in the same way as when the telephone is on.
Prerequisite:
Mobile unit is activated!
Activating the keypad lock:
Press the On/Off key for
less than
1 second
.
Display when keypad is locked.
Deactivating the keypad lock:
Press the On-Off key
briefly
.
Display when telephone is "on", see
page 10.
Activating/deactivating mobile units
Activating/deactivating the keypad lock
!
Note:
The mobile unit switches off completely if you press the
On/Off key for too long.
20
This
display when the mobile is
on
is a prerequisite and initial status
for all telephone functions (see also
”Radio range” page 8).
,
,
,
,
or an other name may be dis-
played (see page 48) depending on
the current base (system).
Press the talk key -
the user’s own
mobile phone number appears in the
display.
Enter the internal number when the
you hear the dial tone –
the entered
digits are displayed
.
See also
Note!
Call
Conduct the call –
the name or the
number of the user is displayed
.
Ending a call
Press the on-hook key
or
place the
mobile unit into the charging shelf.
Note:
● You can use the menu key
or the display key
to call up the short cut list and start your short cuts
when a connection is set up (while a call is in
progress).
● All functions
concluded with the on-hook key
can also be concluded by
inserting the mobile unit
into the charging shell.
● All functions can be
cancelled
with the
on-hook
key
.
Internal dialling
Note:
The dialled number is automatically stored for number
redial, see page 23.
Telephone functions
21
Press the talk key -
the user’s own
mobile unit number appears in the dis-
play.
External code
e.g.
Enter the external code, e.g.
"0 "
,
when you hear the dial tone.
Dial the external number -
the entered
digits are displayed.
See also
Note!
Call
Conduct the call.
Ending a call
Press the on-hook key
or
place the
mobile unit in the charging shell.
The mobile unit’s
ringing tone is audible
. The caller’s
name is displayed if the caller is an internal user. The
number or the name is displayed if the caller is an external
user (as for optiset telephones)!
● The mobile unit
is in the charging shell:
Simply
remove the mobile unit from
the charging shell*.
* Only if Auto Talk is activated – see also page 50!
or
● The mobile unit
is not in the charging shell:
Press the talk key.
Ending a call
Press the on-hook key
or
place the
mobile unit in the charging shell.
External dialling
Note:
The dialled number is automatically stored for number
redial.
Answering calls
Telephone functions
To Next Page
Loading...
