49
Settings
ISDN configuration
Not relevant for cordless EM.
De-registering a base
The mobile unit should
not be de-registered!
Attention!
If the mobile unit is de-registered, it must be re-
registered again as when putting it into service,
before it can be used again (see page 17)!
50
Settings
* for international mobile unit variants: English language; Select Services off
Overview – handset settings
Setting Explanation/notes Level Default
Beeps
see page 51 – –
Auto
Backlight
The backlight is switched on
when the first key is
pressed.
The backlight is automati-
cally switched off to save the
batteries if the telephone is
not used for 15 seconds
.
On/Off On
Auto Talk
You can define whether the
talk key must be pressed
when the mobile unit is
removed from the charging
shell to accept a call
.
On/Off On
Select
Services
see page 53 – On*
Change PIN
see page 55 – –
Language
Local mobile unit display
texts in German, English,
French, Italian, Spanish,
Dutch or Portuguese
7 lan-
guages
German*
BabyAlarm-
Level
Not relevant for cordless EM. – –
Initia lization
●
The r
esetting of the
mobile unit to the initiali-
zation state (defaults) is
protected
by the
mobile
unit PIN
.
●
Resetting the mobile
deletes the
redial
number. The
registra-
tion (login) and the
mobile PIN
are retained
!
––
51
Settings
Overview – beeps
Beep type Explanation, note Default
Key Beeps
Audible each time a key is
pressed
.
On
Batt. Low Beep
Audible approx. 5 minutes before
the battery runs out.
On
Range Warning
Audible when you leave the radio
range.
Off
Confirm Beep
Audible if a local function/set-
ting was successfully per-
formed
.
On
Error Beep
Audible if a function/setting was
not
successfully performed.
Also in the case of erroreous/
unauthorised entries.
On
In Range Beep
The in range beep is audible if the
mobile unit is reconnected to a
base station (resynchronised
with base).
Off
See
page 62 for information about
acoustic signals
!
To Next Page
Loading...
