31
Switching functions
1
)
if activated (consult your system administrator if necessary).
2
)
you can enter the codes that are valid for your system in this column.
Switch actuation, on
off
To switch on/off certain devices (e.g.
relay).
✱
90
#
90
Recall to network
(flash)
To allows features to be used in ana-
logue lines, a signal must be transmitted
through the line before the number is
dialled.
✱
51
Phone lock
(system)
unlock
Define lock code
Protect the telephone against
unauthorized use.
✱
66
#
66
✱
93
Telephone data service
Control with the telephone computer.
✱
42
Date enter
delete
Enter a unique date for the next 24
hours via the telephone.
✱
46
#
46
Door opener via DTMF enable
lock
Enable the door opener feature to be
activated by means of a code.
✱
89+ph,
no.+
code
#
89+ph. no.+
code
Door opener via adapter box(Short
cut)
Activate the door opener feature from
the telephone.
✱
61+ph. no.
Call pickup, directed
Answer calls for an other phone on your
own phone.
✱
59+ph. no.
Call pickup, group
Answer calls for telephones within a call
pickup group on your own phone.
✱
57
Retrieve an external
call from common hold
Transfer a call on hold to the assigned
line.
✱
63+line
code
Functions
1
)
Standard
code
System-
specific
code
2
)
32
Telephone directory
33
Your mobile unit has a telephone directory for storing up to
100 numbers, see also Note on page 43. The stored num-
bers can be simply dialled, modified or deleted at any time.
Access to the telephone directory is locked if the mobile unit
is locked.
Three of four letters/characters are assigned to each digit
key.
Blanks,
full stops
and
hyphens
are assigned to the
"0" key.
For information about other special characters see ”Over-
view – key layout” page 34.
When saving an entry, specify the
name in the 1st line
and
the telephone number in the 2nd and 3rd lines
.
●
Enter the names
(1st line, up to 16 characters)
Enter letters
Press the key the appropriate number of times
in quick
succession
depending on the
position
of the letter on
the key –
1st, 2nd, 3rd or 4th position
– or hold the key
down see also ”Overview – key layout” page 34.
Press the
key to switch from
lower case to upper
case
for a particular character.
Enter digits
You can also enter digits when entering the name.
Press the appropriate digit keys
4 or 5 times in quick
succession
depending on the number of letters on the
digit key.
Enter special characters
In accordance with the key layout overview, press the key
the appropriate number of times (up to 8 times) to enter
the special character.
Note:
Numbers from the number redial memory can also be
transferred to the telephone directory, see page 23.
Entering letters/characters and digits
Telephone directory
To Next Page
Loading...
