46
Settings
Overview – settings
Setting Explanation/notes Level Default
Handset
Volume
Call volume;
Level 1
is
not shown
in the
display!
31
Ringer
Options
– volume
– tone
Volume and tone
(call signal, bell)
Low to high or
ringer off
Set tone frequency
6
0
10
6
2
Register
see page 17 – –
Ba se
Settings
see page 48
––
Handset
Settings
see page 50
––
Note:
●
Before it is saved, each setting can be cancelled
using
or and you can return to the higher-
level display.
●
On-hook key
for terminating/cancelling functions
and
returning to the "on" status
immediately.
47
Settings
Press the menu key.
Scroll to
and confirm.
For an explanation of the individual
settings, see the section entitled
"Overview – settings", page 46.
Example:
Setting the ringer volume
Press the menu key.
Scroll to
and confirm.
Scroll to
and confirm.
Confirm the ringer volume – the ringer
volume audible is specific to the cur-
rent setting (default: level 6), see the
display.
Press the display keys to set the
required volume and confirm.
Settings – handset, ringer...
5 "#
1 5 "#
Dark bars indicate the current
setting – level 3 in this case
Confirm current setting
(save)
Change the setting
Symbol for ringer
7% !
See page 62 for information about
acoustic signals
!
48
Settings
You can rename the preset base names "Base 1" through
"Base 6". Within a company, for example, base 1 could be
changed to "Plant 1" and base 2 changed to "Plant 2".
Changing the base name
Press the menu key.
Scroll to
and confirm.
Scroll to
and confirm.
e.g.
Scroll to the desired base.
Press the display key.
Confirm
& !
.
flashes.
Name
Enter a new name for base 1
(max. 16 characters).
Enter letters/characters and correct if
necessary, see page 33 and 34.
Press the display key.
Confirm
"
.
Base settings
4
) #
#*4
4
$
To Next Page
Loading...
