Siemens GIGASET C470 IP - Setting the Alarm Clock

99
Setting the alarm clock Handset settings
Gigaset C470 IP / EN for AUS / A31008-M1916-C401-2-7619 / settings_bs_hs_pabx.fm / 17.12.07
Version 2.1, 08.01.2007
¤ Change multiple line input:
Key Tones:
Select On or Off.
Confirm.:
Select On or Off.
Battery:
Select On, Off or In Call. The battery warning tone is only activated/deactivated and only
sounds during a call.
§Save§ Press the display key to save the setting.
You cannot deactivate the confirmation tone for placing the handset in the charging cra-
dle.
Setting the alarm clock
Precondition: The date and time have already been set (page 13).
Activating/deactivating the alarm clock and setting the wake-up time
v ¢ ì Alarm Clock
¤ Change multiple line input:
Activation:
Select On or Off.
Time:
Enter the wake-up time in 4-digit format.
Melody:
Select melody.
Volume:
Set the volume (1–6).
§Save§ Press the display key to save the setting.
The ì icon is displayed in the idle display.
A wake-up call with the selected ringer melody is signalled on the handset. The wake-up
call sounds for 60 seconds. ì is shown in the display. If no key is pressed, the wake-up call
is repeated twice at five minute intervals and then turned off.
During a call, the wake-up call is signalled by a short tone.
Please note:
You can also adjust the ringer tones via Ð Settings £ Audio Settings £ Advisory Tones in the menu.