68
SMS (text messages) Activating/deactivating SMS function
Gigaset C470 IP / EN for AUS / A31008-M1916-C401-2-7619 / sms_BRD_neutral.fm / 17.12.07
Version 2.1, 08.01.2007
Activating/deactivating SMS function
If you deactivate the SMS function, you cannot send or receive any SMS messages with
your phone.
The settings you have made for sending and receiving SMS messages (e.g. the call num-
bers of the SMS centres) and the entries in the incoming and draft message lists are saved
even after you turn off your phone.
v Open menu.
55O2L
Enter the digits.
Q
§OK§ Deactivate SMS function.
Or:
§OK§ Activate SMS function (default setting).
SMS troubleshooting
Error codes when sending
Self-help with errors
The following table lists error situations and possible causes and provides notes on trouble-
shooting.
E0 Calling Line Identification permanently withheld (CLIR) or Calling Line Identification not activated.
FE Error occurred during SMS transfer.
FD Connection to SMS centre failed; see self-help.
You cannot send messages.
1. You have not requested the CLIP service (Calling Line Identification Presentation).
¥ Ask your service provider to enable this service.
2. SMS transmission has been interrupted (e.g. by a call).
¥ Re-send the SMS.
3. Network provider does not support this feature.
4. No number or an invalid number is entered for the SMS centre set as the active send service centre.
¥ Enter the number (page 66).
You receive an incomplete SMS.
1. Your phone's memory is full.
¥ Delete old SMS messages (page 62).
2. The service provider has not yet sent the rest of the SMS.
You have stopped receiving SMS messages.
1. You have changed the ID of your mailbox.
¥ Give your SMS contacts your new ID or undo the change (page 65).
2. You have not activated your mailbox.
¥ Activate your mailbox (page 65).
To Next Page
Loading...
Need help?
General
