Siemens GIGASET C470 IP - ECO DECT: Reducing the Power Consumption and Transmission Power of the Base Station

25
Belt clip and headset ECO DECT: Reducing the power consumption and transmission power
Gigaset C470 IP / EN for AUS / A31008-M1916-C401-2-7619 / starting.fm / 17.12.07
Version 2.1, 08.01.2007
ECO DECT: Reducing the power consumption and
transmission power of the base station
The base station of your phone is an ECO DECT base station, this means that:
u The base station uses less power because it is equipped with a power-saving mains
adaptor.
u The reduction of the handset's transmission power is dependent on the handset's prox-
imity to the base station.
u The base station can also be switched to eco mode. Eco mode reduces the transmission
power and power consumption of the base station. This can be set on your handset.
Activating/deactivating eco mode
Precondition: Repeater support must be deactivated.
v ¢ Ð Settings ¢ Base ¢ Add. Features
Eco Mode Select and press §OK§ (=on).
Eco mode enables an additional reduction in the transmission power of the Gigaset C47H
handset. If, with eco mode activated, the transmission power of both the base station and
the handset is reduced, the ½ icon is shown in the top line of the display.
Please note:
– Activating eco mode reduces the range of the base station.
– Eco mode and repeater support cancel each other out, i.e. both functions cannot be used at the
same time.
‰