84
Using the network mailbox Configuring the network mailbox for fast access
Gigaset C470 IP / EN for AUS / A31008-M1916-C401-2-7619 / T-NetBox_SAG-registration.fm / 17.12.07
Version 2.1, 08.01.2007
Configuring the network mailbox for fast access
You can use fast access to make direct calls to a network mailbox.
Assigning key 1 of the handset, changing assignments
The setting for fast access is handset-specific. You can assign a different answer machine
to key on each registered handset.
No answer machine is preconfigured for fast access in the default settings.
Fast access is not yet set on the handset: Press and hold the key .
Or:
v
¢ Ð Settings ¢ Voice Mail ¢ Set Key 1
The list of connections (VoIP and fixed line network) that are assigned to the handset as
receive numbers is displayed. The display shows Net AM: xxx, where xxx is replaced by the
relevant default name for the connection (IP1 to IP6, Fxd. line ).
s Select connection and press
§OK§ (=on).
If a number is already saved to the base station for the selected network mailbox, fast
access is activated.
a Press and hold (idle status).
If no number has been saved for the network mailbox a message is displayed to this effect.
You will be prompted to enter the number for the network mailbox.
s Jump to the Number line.
~ Enter the number for the network mailbox.
§Save§ Press the display key.
a Press and hold (idle status).
Fast access is automatically activated.
Calling the network mailbox
Press and hold.
If you have set a network mailbox for fast access you will be connected straight to this net-
work mailbox.
d If necessary, press the hands-free key.
You will hear the answer machine announcement.
Please note:
You can only assign fast access to one answer machine.
However, you can also call the network mailbox assigned to a handset's receive numbers directly via
the message key (page 85).
‰
To Next Page
Loading...
