54
Using the directory and lists Opening lists with the message key
Gigaset C470 IP / EN for AUS / A31008-M1916-C401-2-7619 / directories_charges.fm / 17.12.07
Version 2.1, 08.01.2007
Opening lists with the message key
You can use the message key f to open the following lists:
u Network mailbox, see page 85
A separate list is displayed for each network mailbox.
Precondition: Its number is saved in the base station, it is switched on (page 83/
page 136) and the corresponding VoIP/fixed line network number is assigned to the
handset as a receive number
u SMS list, see page 62
If several mailboxes are set up (page 64), several lists will be displayed, if required.
u Incoming e-mail list, see page 70
The list is only shown if new messages have arrived in the mailbox from the incoming
e-mail server.
u Calls list
u Messenger message list, see page 78
The list is only shown on the handset that is online.
An advisory tone sounds as soon as a new message arrives in a list. The f key flashes
(it goes off when the key is pressed). In idle status, the display shows an icon for the new
message:
The number of new entries is shown beneath the corresponding icon.
List selection
Pressing the f button will only display lists that contain messages and also the network
mailbox lists Net AM: ....
Lists with new messages are shown first and identified in bold. The number of messages
received are shown in brackets.
If a list contains no new messages, the number of old messages will be shown. Exception:
(0) is displayed for Net AM: ... network mailboxes.
Example:
¤ Select a list with q and press §OK§.
Icon New message...
Ã
... to one of your network mailboxes
Á
... in calls list
À
... in the SMS, messenger or e-mail list
Messages & Calls
Calls List: (2)
Net AM: IP1 (4)
Net AM: Fxd. line (0)
Net AM: IP2 (0)
Ý OK
To Next Page
Loading...
