Siemens GIGASET C470 IP - Page 17

16
First steps Connecting the base station
Gigaset C470 IP / EN for AUS / A31008-M1916-C401-2-7619 / starting.fm / 17.12.07
Version 2.1, 08.01.2007
1. Connect the phone cord and power lead to the base station
1. Insert the phone cord into the lower connection socket at the rear of the base station.
2. Insert the power lead of the mains adapter into the upper connection socket at the rear
of the base station.
3. Push both cables into the appropriate cable channels.
2. Connect the base station to the fixed line network and the mains power supply
1. Insert the phone cord into the fixed line network connection socket.
2. Then insert the mains adapter into the mains socket.
1
2
3
2
1