23
Making settings for VoIP telephony First steps
Gigaset C470 IP / EN for AUS / A31008-M1916-C401-2-7619 / starting.fm / 17.12.07
Version 2.1, 08.01.2007
¤ Start the Web configurator with the IP address.
¤ If no connection can be established, change the settings on the router (activate DHCP
server) or the phone's IP address.
Provider registration failed!
u Your personal data for registering with the VoIP provider may have been entered incom-
pletely or incorrectly.
¤ Check your entries for Username, Authent. Name and Authent. Password. In particular,
check your use of upper and lower case.
To do this, open the following menu on your handset:
v
¢ Ð Settings ¢ Telephony ¢ VoIP (Enter system PIN) ¢ Provider Registr.
(see page 106)
u The server address for the VoIP server has not yet been entered, or has been entered
incorrectly.
¤ Start the Web configurator.
¤ Open the following Web page: Settings ¢ Telephony ¢ Connections.
¤ Click the Edit button next to the first VoIP connection.
¤ Edit the server address where necessary.
Please note:
If port forwarding is activated on your router for the ports that have been registered as the SIP port
(Standard 5060) and the RTP port (Standard 5004), it is advisable to deactivate DHCP and assign the
phone a static IP address (otherwise you may not be able to hear the other party during VoIP calls):
– Assign IP address via the handset menu:
v
£ Ð Settings £ Base £ Local Network
Or
– Assign IP address via the Web configurator:
¥ Open the following Web page: Settings £ IP Configuration.
¥ Select IP address type.
Please note that the IP address and subnet mask depend on the router's address block.
You must also enter the standard gateway and DNS server. The IP address for the router is generally
entered here.
To Next Page
Loading...
