122
Connecting/using other devices
Gigaset DX800A all in one / GRC EN / A31008-N3100-T101-1-7619 / HS_and_other_Devices.fm / 31.08.10
Version 4, 16.09.2005
Using GSM mobiles (Link2mobile)
You can conduct calls on your base and/or a
registered handset via the GSM connection
on your Bluetooth GSM mobile (call external
parties via the GSM connection on the
mobile or accept calls via the GSM connec-
tion) if the following prerequisites are met:
u Bluetooth mode is activated on the base
and mobile (
¢ page 117).
u Your GSM mobile has been registered
(
¢ page 118) on the base and activated
(
¢ page 120).
u There is a Bluetooth connection estab-
lished between the base and mobile.
u The mobile is in range of the base (less
than 10 m).
u For outgoing calls: The mobile connec-
tion is assigned to the base as a send
connection, or the base can select the
GSM connection as a send connection
(
¢ page 137).
u For accepting incoming calls: The GSM
connection is assigned to the base as a
receive connection (
¢ page 138).
A connection is automatically established
between the base in Bluetooth mode and
the activated mobile in range:
u If a call arrives via the mobile's GSM con-
nection (
¢ page 54)
u If you attempt to make a call on the base
via the GSM connection (
¢ page 52)
If Bluetooth mode is deactivated on the
base:
¤ Open the list of known devices.
¤ Select the activated mobile (marked
with μ).
¤ Press the display key §Options§.
¤ Select Connect Mobile and press §OK§.
Bluetooth is activated on the base. The base
connects to the mobile.
Simultaneous Bluetooth
connections
Your base can connect to both a headset and
a data device/mobile via Bluetooth at the
same time.
However, please note the following:
u The Bluetooth menu cannot be opened
on the base.
u You can use the headset and at the same
time use a mobile/data device to initiate,
accept or manage a call.
u You cannot use the headset while trans-
ferring data via Bluetooth.
Please note
For instructions on sending vCards to a
Bluetooth device or receiving them from
a Bluetooth device, see page 74.
Please note
u You can also assign this function to a
function key on the base,
¢ Connect Mobile on page 125.
u If the mobile is taken beyond the
Bluetooth range of the base, you
should re-establish the connection
between the two as soon as the
mobile is within range again. This will
ensure that a GSM call either to the
base or from the base using the GSM
connection is transferred.
Establishing a manual connection:
¤ Select the mobile from the list of
known devices.
¤ Select §Options§ ¢Connect Mobile
and press
§OK§.
Or:
¤ Press the function key Connect
Mobile.
To Next Page
Loading...
