EasyManua.ls Logo

Siemens Gigaset S450 IP - Authorisation; Specifications

Siemens Gigaset S450 IP
143 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
109
Appendix
Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-2-7619 / appendix.fm / 28.3.07
Version 4, 16.09.2005
Authorisation
This device is intended for analogue
phone lines in your network.
Voice over IP telephony is possible with an
additional modem via the LAN interface.
Country-specific requirements have been
taken into consideration.
We, Siemens Home and Office
Communication Devices GmbH & Co. KG,
declare that this device meets the
essential requirements and other relevant
regulations laid down in Directive 1999/5/
EC.
A copy of the 1999/5/EC Declaration of
Conformity is available at this Internet
address:
http://www.siemens.com/gigasetdocs
.
Specifications
Recommended batteries
(Valid at the time of going to press)
Nickel-metal-hydride (NiMH):
u Sanyo Twicell 650
u Sanyo Twicell 700
u Panasonic 700 mAh "for DECT"
u GP 700mAh
u Yuasa Technology AAA Phone 700
u VARTA Phone Power AAA 700mAh
u GP 850mAh
u Sanyo NiMH 800
u Yuasa Technology AAA 800
The handset is supplied with two recom-
mended batteries.
Handset operating times/charging
times
The following information relates to bat-
teries with a capacity of 650 mAh.
The operating and charging times apply
only when using the recommended bat-
teries.
Base station power consumption
Depending on current status, around
2.5 W.
Standby time around 170 hours (7 days)
Talktime around 13 hours
Charging time around 6 hours
Please note:
When the display backlight is switched on, the
standby time of the handset is reduced to
around 30 hours.

Table of Contents

Related product manuals