Siemens Gigaset S450 IP - Functions During a Call; Functions after a Call

31
Network services – fixed network
Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-2-7619 / netservices_SAG.fm / 28.3.07
Version 4, 16.09.2005
Functions during a call
Initiate ringback
You hear the busy tone.
§Options§ ¢ Ringback
a Press the end call key.
Consultation
During a call:
§Ext.Call§ Press the display key.
~ Enter a number or copy it from
the directory and press
§OK§.
The number will be dialled via the fixed
network connection.
You have the following options:
u Toggling:
¤ Use q to toggle between the par-
ticipants.
– End call with active participant:
§Options§ End Active Call.
u Conference call:
– Call both subscribers: press the dis-
play key
§Conf.§.
– End the conference call (toggling):
press display key
§EndConf§.
– End call with both participants: Press
the end call key a.
Accepting a waiting call
Precondition: Call waiting is activated
(page 30).
§Accept§ Press the display key.
Or: if the caller's number is not trans-
ferred:
§Options§ ¢ Accept waiting call
You have the option of toggling or holding
a conference call.
Rejecting a waiting call
§Options§ ¢ Reject waiting call
Functions after a call
Cancelling ringback
v ¢ ê Sel. Services ¢ Ringback Off
If you have cancelled the ringback, a code
is sent.
¤ After confirmation from the telephone
network, press the end call key a.
Please note:
After a few seconds, the number selected for a
consultation call is saved in the last number
redial list.
Please note:
– Without CLIP a waiting call is only
announced with a beep.
– If the first call was an internal call, the inter-
nal connection is ended.
– An internal call waiting is shown on the dis-
play. You can neither accept the internal
call nor reject it.