Siemens Gigaset S450 IP - Network Services - Fixed Network; Settings for All Calls

30
Network services – fixed network
Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-2-7619 / netservices_SAG.fm / 28.3.07
Version 4, 16.09.2005
Network services –
fixed network
The following network services can only
be used for making calls via the fixed net-
work.
Network services are functions that your
network provider makes available to you.
You have to request these services from
your network provider.
¤ If you require assistance, please con-
tact your network provider.
Settings for all calls
If you have completed one of the follow-
ing procedures, a code is sent.
¤ After confirmation from the telephone
network, press the end call key a.
You can set the following features:
General call forwarding
v ¢ ê Sel. Services ¢ Fixed Line
¢ Call Divert
¤ Change multiple line input:
When:
Select All Calls / No Answer / When Busy.
Call No.:
Press the display key
§Edit§. Enter the
number to which the call is to be
diverted, and press
Save. You can enter
a fixed network (fixed line), VoIP or
mobile number.
Status:
Activating/deactivating call forwarding.
¤ Press the display key §Send§.
¤ Press the end call key a after the
announcement from the telephone
network.
Activating/deactivating call waiting
If call waiting is activated, a caller on the
fixed network will hear the ringing tone if
you are already conducting a phone con-
versation using your fixed network con-
nection. This call is announced acousti-
cally and visually on your handset screen.
Calls on the VoIP connection are not
shown as call waiting. They are signalled
on other registered handsets. If no other
handset is available, the caller will hear
the busy tone.
Accepting/rejecting call waiting, see
page 31.
v
¢ ê Sel. Services ¢ Fixed Line
¢ Call Waiting
Status: Activate/deactivate.
¤ Press the display key §Send§.
¤ Press the end call key a after the
announcement from the telephone
network.
Please note:
The setting does not affect the procedure for
call waiting on the VoIP connection. For how to
activate/deactivate call waiting for the VoIP
connection, see page 30.