Siemens Gigaset S450 IP - Activating;Deactivating Muting of the First Ring; Activating;Deactivating Advisory; Tones; Display

62
Setting the handset
Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-2-7619 / settings_bs_hs_pabx.fm / 28.3.07
Version 4, 16.09.2005
Activating/deactivating the ringer tone
You can deactivate the ringer tone on your
handset before you answer a call or when
the handset is in idle status; the ringer
tone can be deactivated permanently or
just for the current call. The ringer tone
cannot be re-activated while an external
call is in progress.
Deactivating the ringer tone permanently
* Press and hold the star key
until the Ú icon appears in the
display.
Re-activating the ringer tone
* Press and hold the star key.
Deactivating the ringer tone for the current
call
§Silence§ Press the display key.
Activating/deactivating the alert tone
In place of the ringer tone you can activate
an alert tone. When you receive a call, you
will hear a short tone ("Beep") instead of
the ringer tone.
* Press and hold the star key
and within 3 seconds:
§Beep§§ Press the display key. A call will
now be signalled by one short
alert tone. You will now see
º
in the display.
Activating/deactivating muting
of the first ring
v Open menu.
55O1O
Press keys.
Q
§OK§ Make the first ringer tone
audible.
Or:
1
§OK§ Suppress the first ringer tone.
a Press and hold (idle status).
Activating/deactivating advisory
tones
Your handset uses "advisory tones" to tell
you about different activities and statuses.
The following advisory tones can be acti-
vated and deactivated independently of
each other:
u Key click: every key press is confirmed.
u Advisory tones:
– Confirmation tone (ascending tone
sequence): at the end of an entry/
setting and when an SMS or a new
entry arrives in the calls list
– Error tone (descending tone
sequence): when you make an
incorrect entry
– Menu end tone: when scrolling at
the end of a menu
u Battery tone: The batteries need to be
charged.
v
¢ Ð Settings ¢ Audio Settings
¢ Advisory Tones
¤ Change multiple line input:
Key Tones:
Select On or Off.
Confirm.:
Select On or Off.
Battery:
Select On, Off or In Call. The battery
warning tone is only activated/deacti-
vated and only sounds during a call.
¤ Save changes (page 112).
You cannot deactivate the confirmation
tone for placing the handset in the base
station.