81
Web configurator
Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-2-7619 / web_server.fm / 28.3.07
Version 4, 16.09.2005
Buttons
Buttons are displayed in the bottom sec-
tion of the working area.
Set
Save entries on the phone
Cancel
Reject changes made on the Web page
and reload the settings that are cur-
rently saved on your phone to the Web
page.
Opening Web pages
A brief outline of the navigation to the
individual Web configurator functions is
given below.
Example:
Setting DTMF signalling
Settings ¢ Telephony ¢ Advanced Settings
To open this Web page, carry out the fol-
lowing steps after registration:
¤ Click on the Settings menu in the menu
bar.
¤ Click on the Telephony function in the
navigation area.
The subfunctions of Telephony are dis-
played in the navigation tree.
¤ Click on the Advanced Settings
subfunction.
The Web page from see Figure 2 will be
shown in the Web browser.
Setting the phone with
Web configurator
You can make the following settings using
the Web configurator:
u Connecting your phone to the local
network (page 82)
u Configuring for the telephony
– Make VoIP provider settings
(page 84)
– Configure VoIP accounts
– Specify name of the fixed network
– Activate/deactivate the Gigaset.net
connection
– Make settings to improve voice qual-
ity for the VoIP connections
– Assign VoIP phone numbers to indi-
vidual handsets and the answer
machine
u User-specific dialling rules (page 94)
u Type of DTMF signalling (for remote
operation of a network mailbox)
u Data server for firmware update down-
loads (page 99)
u Displaying VoIP status messages on
your handset (page 100)
Warning:
Changes that have not been saved on your
phone are lost if you move to another Web
page or if the connection to the Web configu-
rator is terminated, e.g. due to exceeding the
time limit (page 79).
To Next Page
Loading...
