73
Using several handsets
Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-2-7619 / T-NetBox_SAG-registration.fm / 28.3.07
Version 4, 16.09.2005
Registering other handsets on the
Gigaset SP450 IP
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows.
On the handset
¤ Start to register the handset as
described in its user guide.
On the base station
¤ Press and hold the registration/paging
key on the base station (page 1)
(min. 1 sec.).
De-registering handsets
You can de-register any registered handset
from any registered Gigaset S45 handset.
u Open list of internal users.
The handset you are currently
using is indicated by < .
q Select the handset to be de-
registered.
§Options§ Press the display key.
De-reg. H/Set No.
Select and press
§OK§.
~ Enter the base station system
PIN (default setting: 0000).
§Yes§ Press the display key to con-
firm the prompt.
a Press and hold (idle status).
The handset is de-registered immediately,
even if it is not in idle status.
Locating a handset ("paging")
You can locate your handset using the
base station.
¤ Press the registration/paging key on the
base station (page 1) briefly.
¤ All handsets will ring at the same time
("paging"), even if ringer tones are
switched off.
Ending paging
¤ Press the registration/paging key on the
base station (page 1) briefly.
Or
¤ Press talk key c on a handset.
Changing the base station
If your handset is registered to more than
one base station, you can set it to a partic-
ular base station or to the base station
that has the best reception (Best Base).
v
¢ Ð Settings ¢ Handset
¢ Select Base
s Select one of the registered
base stations or Best Base and
press
§OK§.
Please note:
You can also make changes on the base station
with a Gigaset C45 handset.