11
First steps
Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-2-7619 / starting.fm / 28.3.07
Version 4, 16.09.2005
Connecting the base station with the
fixed network and the mains power
supply
¤ Please connect the phone jack first and
then the mains adapter, as shown
below.
1 Phone jack with phone cord
2 Underside of the base station
3 Mains adapter 230 V
Please note:
u Keep the mains adapter plugged in at
all times for operation, as the phone
does not work without mains connec-
tion.
u If you buy a replacement phone cord
from a retailer, ensure that the phone
jack is connected correctly.
You can now use your phone to make calls
via the fixed network and can be reached
on your fixed network number.
Connecting the base station with the
router
For Internet access you need a router
connected to the Internet via a modem
(this may be integrated in the router).
1 Side view of the base station
2 Network plug (LAN) with network cable
3 Network plug on the router
As soon as the cable connecting the
phone and router is plugged in, the paging
key lights up on the front of the base
station (page 1).
You can now establish VoIP connections
within Gigaset.net (page 27).
Correct phone jack assignment
1unused
2unused
3a
4b
5unused
6unused
1
3
2
3
2
1
4
5
6
1
2
3
3
To Next Page
Loading...
