Siemens Gigaset S645 - Correcting Wrong Inputs; Notes on the Operating Instructions; Symbols; Example of a Menu Input

11
Notes on the operating instructions
Gigaset S645 / GBR / A31008-M1634-L101-1-7619 / starting.fm / 27.08.2004
To return to the previous menu level or to
cancel the operation, press the end call
key a.
Correcting wrong inputs
Correct wrong characters in the text by
navigating to the wrong input with the
control key. You can then:
u delete the character to the left of the
cursor with X,
u insert the character to the left of the
cursor,
u overwrite characters when entering
date and time etc. (flashes).
Notes on the operating
instructions
This section explains the meaning of cer-
tain symbols and typographical conven-
tions that are used in this user guide.
Symbols
Copy Entry / Copy List (example)
Select one of the two specified
menu functions.
~ Enter digits or letters.
§Save§ The display keys' current func-
tions are shown in the bottom
display line in reverse high-
lights.
q Press the control key at the top
or bottom: scroll up or down.
r Press the control key on the
right or left: e.g. Selecting the
setting.
c / Q / * etc.
Press the illustrated key on the
handset or on the base sta-
tion.
q Press the plus or minus key on
the base station.
Example of a menu input
The steps you have to perform are shown
in this user guide in sequences of symbols.
This system is explained below using the
example "Setting the display colour
scheme". Explanations are given in the
boxes.
v
¢ Ð ¢ Display
¤ With the handset in idle status, press
on the right of the control key to open
the main menu.
¤ Select the symbol Ð with the control
key – press the control key on the right
or left, at the top or bottom.
H/Set Settings appears in the display
header.
¤ Press the display key §OK§ to confirm the
function H/Set Settings.
The sub-menu H/Set Settings is displayed.
¤ Press at the bottom of the control key
until the menu function Display is
selected.
¤ Press the display key §OK§ to confirm the
selection.
Colour Scheme
Select and press
§OK§.
¤ Press the control key at the bottom
until the menu function Colour Scheme
is selected.
¤ Press the display key §OK§ to confirm the
selection.