Siemens Gigaset S645 - Changing the Loudspeaker and Ringtone Volume; Displaying New Messages

18
Making calls from the base station
Gigaset S645 / GBR / A31008-M1634-L101-1-7619 / telephony.fm / 27.08.2004
Please note:
u The transferred entries are added to the
base station directory. Existing entries
with identical numbers are not over-
written.
u If the base station directory is full you
have to delete the entries on the base
station (page 18) and repeat the trans-
fer.
u Deleting or changing an entry on the
handset after transfer has no effect on
the entry on the base station.
Dialling with the directory/lists
h / c / j
Opening the directory, last
number redial list or calls list.
The first entry is displayed.
q Select entry.
c Press the talk key.
To select a directory entry, you can also
enter the first letter of the name and scroll
to the entry with the plus or minus key q
if necessary.
Deleting a directory/list entry
h / c / j
Opening a directory, last
number redial list or calls list.
q Select entry.
k Press the key. The entry is
deleted.
Exiting the directory/list
¤ Press the end call key a.
Changing the loudspeaker and
ringtone volume
Changing the ringtone volume
Precondition: A call is signalled on the
base station.
q Set the volume ("-" = quieter,
"+" = louder).
Adjusting the loudspeaker volume
During a call or message playback:
q Set volume ("-" = quieter,
"+" = louder).
Activating/deactivating ringer
¤ Press and hold the * key to activate
or deactivate the ringtone perma-
nently.
You will see the icon Ú in the display if the
ringtone is deactivated.
Displaying new messages
New entries in the calls list and new mes-
sages are shown in the idle display of the
base station (page 24).
Note:
Set the ringtone volume and melody on the
handset, see page 57.