EasyManua.ls Logo

Siemens Gigaset S645 - Repeater Support; Activating;Deactivating Internal; Barge-In; Call Director - Call Handset; Base Station Specifically

Siemens Gigaset S645
87 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
58
Handset settings
Gigaset S645 / GBR / A31008-M1634-L101-1-7619 / settings_bs_hs.fm / 27.08.2004
Repeater support
You can extend the range and reception
strength of your base station with a
repeater. You have to activate repeater
mode for this. Calls currently being made
over the base station are cancelled.
Precondition: A repeater is registered.
v
¢ Ð ¢ Base ¢ Add. Features
¢ Repeater Mode
§Yes§ Press the display key.
The menu item is marked by when
repeater mode is switched on.
Activating/deactivating internal
barge-in
v ¢ Ð ¢ Base ¢ Add. Features
¢ Listening In
a Press and hold (idle status).
Call Director – call handset/
base station specifically
You can set your phone so that an external
caller can be put through directly to a cer-
tain handset or to the base station.
After dialling your number the caller is
prompted to select the handset or he
hears your individually recorded message.
He now has 5 sec. to dial the internal
number of the desired handset.
Precondition: The Call Director is acti-
vated (page 58).
If the selected handset does not pick up
the call, the answering machine picks it up
if activated. If the answering machine is
set to 0 sec. (page 40) the Call Director
announcement is not given.
Activating/deactivating the Call
Director
v ¢ Ð ¢ Base ¢ Call Director
Call DirectorSelect and press §OK§ ( =on).
a Press and hold (idle status).
Recording the Call Director
announcement
A typical Call Director announcement is
e.g.: "Dial 1 for Mr. Smith, 2 for the front
desk. Select the >asterisk< if you do not
want to speak to a particular person."
v
¢ Ð ¢ Base ¢ Call Director
Rec Announce
Select and press
§OK§. You are
prompted to start recording.
§OK§ Press the display key. You hear
the ready tone.
¤ Record the announcement.
§End§ Press the display key.
The recorded text is repeated for checking.
Note:
If you press or the end call key a during
recording, the recording is cancelled.
Recording is cancelled if you exceed the max.
recording time of 170 sec. or make pauses
longer than 2 seconds.

Table of Contents

Related product manuals