Siemens Gigaset SE361 WLAN - Connecting the Gigaset SE361 WLAN; Making the Connection to the DSL or Cable Modem

20
First Steps
Gigaset SE361 WLAN / englisch / A31008-M1067-R101-1-7619 / device.fm / 30.10.2006
Schablone 2004_12_27
Connecting the Gigaset SE361 WLAN
Before starting to connect PCs to your Gigaset SE361 WLAN, make sure that
u a wired or wireless Network adapter is connected to the PC. Please read the user
guide that came with the device. Newer PCs and notebooks have wired adapters,
and often wireless adapters, built in at the factory.
u ConnectionPoint is entered as SSID on the network adapter.
Making the connection to the DSL or cable modem
ì Connect the socket on the back of the router marked WAN to your DSL or cable
modem with an Ethernet cable.
Note:
Use a category 5 Ethernet cable with RJ45 jacks on both ends for all connections. The
cable will normally be included with your modem. However, you can also also use the
yellow Ethernet cable, which comes with the Gigaset SE361 WLAN.
DSL or cable modem