96
Appendix
Gigaset SE361 WLAN / englisch / A31008-M1067-R101-1-7619 / appendix.fm / 30.10.2006
Schablone 2004_12_27
You cannot access a
resource (drive or printer)
on another PC.
ì Make sure that TCP/IP has been installed and con-
figured on all the PCs on the local network and that
the PCs all belong to the same workgroup.
ì Check whether the resource has been released on
the PC in question and whether you have the nec-
essary access rights.
ì Printing: Check whether the printer has been set up
as a network printer.
The transmission rate is too
low.
ì Radio data transmission depends on the operating
environment, for example the building stock or the
influence of other devices in the vicinity that trans-
mit in the 2.4-GHz frequency range.
ì Arrange your WLAN devices closer together.
ì Change the antenna direction.
ì Position the device elsewhere.
ì Switch off other radio sources in the vicinity.
They may interfere with data transmission.
ì Choose a different channel.
ì Check to see if the problem also arises with a differ-
ent type of encryption.
Symptom Possible cause and remedial actions
To Next Page
Loading...
